Showing all 5 results

  • 8CH CWDM, 1270-1450nm (Except 1390, 1410) Dual Fiber, LC/UPC

    Conventional ITU-T G.652 single-mode fibers show the significant attenuation around 1400nm caused by the water absorption peak, thus the 1390 and 1410 wavelengths are not used due to the higher attenuation.

    • Passive Transparent Any Rate, Any Service Multiplexing
    • Multiplexing of up to 8 Channels on Fiber Pair to Maximize the Using of Existing Fiber
    • Low Insertion Loss: Typical 2.5dB, Max 3.0dB(TFF)
    • Compliant with All Optical Networking Products (ITU Grid)
    • Applied to Metro, Regional and CWDM Networks
    • The Solution Can be Customized per Customer Application Requirements
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • 8CH CWDM, 1470-1610nm, Dual Fiber, LC/UPC

    CWDM technology provides the flexibility to increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the same fiber cabling. Each channel carries data independently from each other, allowing network designers to transport different data rates. It’s protocol and rate transparent supporting such applications as 1G/10G Ethernet, SDH/SONET and 8/4/2/1G Fiber Channel across the same fiber link.

    • Passive Transparent Any Rate, Any Service Multiplexing
    • Multiplexing of up to 9 Channels on Single Fiber to Maximize the Using of Existing Fiber
    • Low Insertion Loss: Typical 2.0dB, Max 2.4dB(Free Space); Typical 2.5dB, Max 3.5dB(TFF)
    • Compliant with All Optical Networking Products (ITU Grid)
    • Hybrid C/DWDM System via 1530nm/1550nm for Additional DWDM Channels
    • The Solution Can be Customized per Customer Application Requirements
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • 9CH(18 Waves) CWDM, RX: 1270-1590nm, TX: 1290-1610nm, Single Fiber, LC/UPC, Side A (Side B Available)

    CWDM technology provides the flexibility to increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the same fiber cabling. Each channel carries data independently from each other, allowing network designers to transport different data rates. It’s protocol and rate transparent supporting such applications as 1G/10G Ethernet, SDH/SONET and 8/4/2/1G Fiber Channel across the same fiber link.

    • Passive Transparent Any Rate, Any Service Multiplexing
    • Multiplexing of up to 9 Channels on Single Fiber to Maximize the Using of Existing Fiber
    • Low Insertion Loss: Typical 2.4dB, Max 2.6dB
    • Compliant with All Optical Networking Products (ITU Grid)
    • Hybrid C/DWDM System via 1530nm/1550nm for Additional DWDM Channels
    • The Solution Can be Customized per Customer Application Requirements
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • 18CH CWDM, 1270nm-1610nm, Dual Fiber, LC/UPC, 1U Rack Mount

    CWDM technology provides the flexibility to increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the same fiber cabling. Each channel carries data independently from each other, allowing network designers to transport different data rates. It’s protocol and rate transparent supporting such applications as 1G/10G Ethernet, SDH/SONET and 8/4/2/1G Fiber Channel across the same fiber link.

    • Passive Transparent Any Rate, Any Service Multiplexing
    • Multiplexing of up to 18 Channels on Fiber Pair to Maximize the Using of Existing Fiber
    • Low Insertion Loss: Typical 5.0dB, Max 5.5dB (TFF); Typical 2.2dB, Max 2.5dB (Free Space)
    • Compliant with All Optical Networking Products (ITU Grid)
    • Monitor Port Taps off 1% of the Signal to Monitor the Channel Power Levels
    • Hybrid C/DWDM System via 1530nm/1550nm for Additional DWDM Channels
    • The Solution Can be Customized per Customer Application Requirements
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • 2-Slot 1U 19” Rack Chassis, Unloaded

    This 1U rack mounts to standard EIA19” rack rails, holding up to 2 Modules. This chassis consists of SPCC material, which provides high degree of protection and corrosion-resistant, to protect inside Mux/Demux Modules well. The rounded corner can also eliminate accidental injury or damage to installers.

    • Fully Compatible with the ITU Optical Grid
    • Expands Existing Fiber Capacity Regardless of Service
    • 2x 4-9 CWDM Wavelengths Mux/Demux Units
    • 2x 4-8 DWDM Wavelengths Mux/Demux Units
    • 2x 4 Channel DWDM/CWDM OADM Units, One- and Two-way Filter Solutions
    • The Solution Can be Customized per Customer Application Requirements