Showing 1–16 of 18 results
-
- Provide Professional Compatibility and Parameter Test Reports.
- Compliant with Hot Pluggable QSFP-DD/QSFP56 MSA Standard.
- Compliant with RoHS Environmental Standard (Lead-free).
- Supports 400G to 8x 50G Ethernet Interoperability.
-
- Compliant with QSFP DD MSA Specification Rev 3.0
- SFF‐8679 electrical interface compliant
- SFF‐8636 management interface support
- Compliant with SFF-8665
- Compliant with IEEE802.3cd Standard
- Support 50G (PAM4) electrical data rates/channel
- I2C for EEPROM communication
- Pull to Release latch design
- Excellent EMI/EMC performance 360degree cable shield termination
-
- Provide Professional Compatibility and Parameter Test Reports.
- Compliant with Hot Pluggable QSFP-DD/QSFP56 MSA Standard.
- Compliant with RoHS Environmental Standard (Lead-free).
- Supports 400G to 2x 200G Ethernet Interoperability.
-
- Provide Professional Compatibility and Parameter Test Reports.
- Compliant with Hot Pluggable QSFP56/SFP56 MSA Standard.
- Compliant with RoHS Environmental Standard (Lead-free).
- Supports 200G to 4x 50G Ethernet Interoperability.
-
- Provide Professional Compatibility and Parameter Test Reports.
- Compliant with Hot Pluggable QSFP56/QSFP56 MSA Standard.
- Compliant with RoHS Environmental Standard (Lead-free).
- Supports 200G to 2x 100G Ethernet Interoperability.
-
- Hot-pluggable QSFP-DD/QSFP28 form factor full-duplex transceiver assembly
- Data rate up to 25.78125Gbps per channel
- Compliant with QSFP-DD MSA and CMIS 4.0
- Compliant with QSFP28 MSA (SFF-8665), SFF-8636 and IEEE 802.3bm 100GBASE-SR4
- Compliant with IEEE 802.3ba 40GBASE-SR4 and InfiniBand QDR/EDR
- Single 3.3V power supply
- Built-in digital diagnostic functionality
-
- Compatible with IEEE 802.3bj,IEEE 802.3by and InfiniBand EDR
- Supports aggregate data rates of 100Gbps
- Optimized construction to minimize insertion loss and cross-talk
- 26AWG through 30AWG cable
- Customizable EEPROM mapping for cable signature
- Customized cable braid termination limits EMI radiation
- RoHS compliant
- Supports Switches, servers and routers, Data Center networks, Medical diagnostics and networking, Test and measurement equipment, etc.
-
- Max Power Consumption <0.1W.
- Minimum Bend Radius 23/23mm.
- Provide Professional Compatibility and Parameter Test Reports.
- Compliant with Hot Pluggable QSFP28 MSA Standard.
- Compliant with RoHS Environmental Standard (Lead-free).
- Supports 100G to 2x 50G Ethernet Interoperability.
-
- SFF-8436, SFF-8431 Compliant
-
Protocol agnostic support of 40G, QDR InfiniBand, SAS & Fibre Channel
-
Up to 10.3125 Gbps transfer rate per SFP+ channel (40 Gbps aggregate)
-
Low cross-talk and pair-to-pair skew maintain signal integrity
-
Fully compliant with the latest SFP+ & QSFP MSA (Multi-Source-Agreement)
-
Supports all current 10-Gigabit Ethernet and 40-Gigabit Ethernet standard
-
The perfect direct attached storage splitter cable for Fibre Channel & SAS
-
Enjoy a reduced power budget and lower port cost compared to optical
-
Fully RoHS compliant for environmental protection
-
Application for InfiniBand SDR, DDR, Ethernet 1G, 10G, Fibre Channel, Networking, Storage, Hubs, switches, routers, servers, etc.
-
- Supports aggregate data rates of 400Gbps(PAM4)
- Compatible with IEEE 802.3bj and IEEE 802.3cd
- 400G Ethernet(IEEE 802.3cd), InfiniBand EDR
- Optimized construction to minimize insertion loss and cross-talk
- Customizable EEPROM mapping for cable signature
- Customized cable braid termination limits EMI radiation
- Straight and break-out assembly configurations are available
-
- Supports aggregate data rates of 200Gbps(PAM4).
- Minimum Bend Radius 35mm for Flexible Routing.
- Hot Pluggable QSFP56 MSA, IEEE 802.3bj, IEEE 802.3cd and RoHS Compliant
- Excellent attenuation and low delay performance for best InfiniBand HDR end-to-end performance.
- Use For Switches, servers, routers, Data Center networks, Storage area networks, High-performance computing, etc.
-
- Max Power Consumption <0.1W.
- Minimum Bend Radius 33mm.
- Provide Professional Compatibility and Parameter Test Reports.
- Compliant with Hot Pluggable QSFP28 MSA Standard.
- Compliant with RoHS Environmental Standard (Lead-free).
-
- Compliant with SFF- 8436
- Up to 14.3125Gbps data rate per channel
- Single 3.3V power supply
- RoHS compliant
- 56G InfiniBand
- Cost-effective copper solution
- Lowest total system power solution
- Lowest total system EMI solution
- Optimized design for Signal Integrity
-
-
- Fully compatible with IEEE802.3ba and Infiniband QDR specifications
- 40 Gb/s total bandwidth
- 4 independent duplex channels operating at 10Gbps, also support for 2.5Gbps, 5Gbpsdata rates
- 100-ohm differential impedance system
- Single 3.3V power supply, low power consumption <1.5W
- 30 AWG to 26 AWG cable sizes available
- RoHS, QSFP MSA compliant
- Application for Data Center Networking, Networked storage systems, Switches, and Routers
- Compliant InfiniBand Trade Association (IBTA), 40Gigabit Ethernet ( 40G BASE – CR4)
-
- Up to 25.78125 Gbps data rate
- Up to 5 meters of transmission
- Hot-pluggable SFP 20PIN footprint
- Improved Pluggable Form Factor(IPF) compliant for enhanced EMI/EMC performance
- Compatible to SFP28 MSA
- Compatible with SFF-8402 and SFF-8432
- RoHS Compatible
- 25G Ethernet
